? Watch dog Timer
In order to detect the failure of Exasmoc controller or Exasmoc station, a watchdog timer function is provided. Exasmoc controller periodically sets a watchdog timer flag to the control station of DCS. The control station resets the flag every time when it is set. If Exasmoc controller cannot set this flag within a fixed interval then the control station recognizes the Exasmoc has failed, and the base controller (local loop) in control station will be switched from REMOTE to LOCAL mode.
This function is effective in all type of Yokogawa DCS mentioned in this manual. It might be also supported for other vendor DCS, provided it could handle this flag.
? User Defined Calculation (R3.06)
Apart from the Exasmoc controller standard function, Exasmoc Kernel collect input data using OPC interface, execute the define calculation and output the result.
Definition of Input tag, output tag and the calculation logic definition are done using PCTP: SMOCPro function. It is also possible to send the calculation result to process output or other DCS tags.
? 看門狗計時器
為了檢測Exasmoc控制器和Exasmoc站的故障，系統提供了看門狗計時器功能。Exasmoc控制器定期向DCS的控制站寫入看門狗計時器標簽。在寫入時，控制站中該標簽復位。如果在固定的時間間隔內Exasmoc控制器無法寫入此標簽，則控制臺會識別出Exasmoc斷線，控制臺中的基礎控制器（本地回路）將從REMOTE切換到LOCAL模式。
此功能在本手冊中提到的所有類型的橫河電機DCS中均有效。其他供應商DCS也可能支持，只要它可以處理此標簽。
? 用戶定義的計算（R3.06）
除了Exasmoc控制器標準功能外，Exasmoc Kernel采用OPC接口采集輸入數據，執行定義計算并輸出結果。
使用PCTP：SMOCPro功能來完成輸入位號，輸出位號和計算邏輯的定義。也可以將計算結果發送到過程輸出或其他DCS位號。
Arbitrary Tag Item User definition function kernelwrapper
In case Input is value In case Output is value
任一位號+條目 用戶定義功能 Kernel包 如果輸入是值 如果輸出是值
Definition of Input and Output Data Identity Definition file of Calculation Calculation 1: Set CV Range Comment 1: CV Set Range High Calc Value
輸入和輸出的定義 數據標識 計算的定義文件 計算1：設定CV范圍 標注1：CV設定范圍高計算值
Instruction Manual
NTPS410 Exasmoc Online Multivariable, Model Predictive and Optimizing Controller Operation Manual
使用說明書
NTPS410 Exasmoc在線多變量，模型預測和優化控制器操作手冊
NTPS410 Exasmoc Online Multivariable, Model Predictive and Optimizing Controller
IM 36J06D11-01E 12th Edition
CONTENTS
Preface and Intended Readership
Safety Precautions
Copy Right and Trade Mark
Revision Information
APC Solutions Manuals Road Map
PART- A Introduction of Exasmoc Controller
PART- B Exasmoc for use with CENTUM DCS
PART- C AIDA Data Generator
Preface
This document covers the operation aspects of Exasmoc online multivariable, model predictive and optimizing controller software integrated with the user’s DCS. The operational instructions are meant only for operating Exasmoc for the process plants. It is assumed that the user’s DCS and process plant is in operation. It is also assumed that Exasmoc application is running along with the operation displays.
Intended Readership
This manual is intended for use by plant operator and process engineer who are actually operating the plant and responsible to implement Exasmoc an online multivariable, model predictive and optimizing controller for their process. A good knowledge and experience of operating plant through DCS is essential. A basic knowledge of Advanced Process Control and Windows based system is also required.
NTPS410 Exasmoc在線多變量，模型預測和優化控制器
IM 36J06D11-01E第12版
內容
前言和意向讀者
安全須知
版權和商標
修訂信息
APC解決方案手冊路線圖
PART-A Exasmoc控制器的介紹
PART-B Exasmoc用于CENTUM DCS
PART-C AIDA數據生成器
前言
本文檔介紹了與用戶DCS集成的Exasmoc在線多變量，模型預測和優化控制器軟件的操作說明。操作說明僅適用于為工廠流程運行Exasmoc。 假設用戶的DCS和工廠流程正在運行。 還假設Exasmoc應用程序隨操作一起運行顯示。
面向讀者
本手冊旨在由實際操作工廠的工廠操作員和負責為其過程實施Exasmoc在線多變量，模型預測和優化控制器的過程工程師使用。 擁有良好的DCS運行，工廠知識和經驗是至關重要的。與此同時還需要先進過程控制和基于Windows系統的基礎知識。
