1. 前言

轉載請說明原文出處, 尊重他人勞動成果!

源碼位置: https://github.com/nicktming/istio
分支: tming-v1.3.6 (基于1.3.6版本)

在前一篇文章 [istio源碼分析][pilot] pilot之DiscoveryServer 中已經分析了DiscoveryServer拿到galley和k8s的數據后向每一個連接的client端(其實是envoy) 發送了一個XdsEvent到client.pushChannel.

本文將分析從client到discoveryServer端之間的聯系. 主要是分析整體的流程, 關于細節方面的東西可以在具體問題中進行調試即可.

2. adsc

adsc是istio模擬的一個client端, 真正的客戶端是sidecar中的envoy. 這里為了方便, 因此用adsc進行分析.

// pkg/adsc/adsc.go
func (a *ADSC) Run() error {
    var err error
    if len(a.certDir) > 0 {
        ...
        a.conn, err = grpc.Dial(a.url, opts...)
        ...
    } else {
        a.conn, err = grpc.Dial(a.url, grpc.WithInsecure())
        ...
    }
    // 建立連接
    xds := ads.NewAggregatedDiscoveryServiceClient(a.conn)
    edsstr, err := xds.StreamAggregatedResources(context.Background())
    if err != nil {
        return err
    }
    a.stream = edsstr
    // 從discovery server接收信息
    go a.handleRecv()
    return nil
}
func (a *ADSC) handleRecv() {
    for {
        // 從server端獲得信息
        msg, err := a.stream.Recv()
        ...
        listeners := []*xdsapi.Listener{}
        clusters := []*xdsapi.Cluster{}
        routes := []*xdsapi.RouteConfiguration{}
        eds := []*xdsapi.ClusterLoadAssignment{}
        // 為獲得的數據分類
        for _, rsc := range msg.Resources { // Any
            a.VersionInfo[rsc.TypeUrl] = msg.VersionInfo
            valBytes := rsc.Value
            if rsc.TypeUrl == listenerType {
                ll := &xdsapi.Listener{}
                _ = proto.Unmarshal(valBytes, ll)
                listeners = append(listeners, ll)
            } ...
        }
        ...
        // 向server端發送ACK
        a.ack(msg)
        ...
        // 客戶端處理listener, cluster, endpoint, route
        ...
    }
}
func (a *ADSC) ack(msg *xdsapi.DiscoveryResponse) {
    _ = a.stream.Send(&xdsapi.DiscoveryRequest{
        ResponseNonce: msg.Nonce,
        TypeUrl:       msg.TypeUrl,
        Node:          a.node(),
        VersionInfo:   msg.VersionInfo,
    })
}

1. 與discoveryServer建立連接.
2. 通過handleRecv方法與server端交流.
3. 將獲得的數據分類(endpoint, listener, cluster, route)
4. 往server端發送ack.
5. 客戶端自己處理數據.

那envoy就是數據生成的配置文件了, xds協議.

3. server端

// StreamAggregatedResources implements the ADS interface.
func (s *DiscoveryServer) StreamAggregatedResources(stream ads.AggregatedDiscoveryService_StreamAggregatedResourcesServer) error {
    peerInfo, ok := peer.FromContext(stream.Context())
    peerAddr := "0.0.0.0"
    if ok {
        peerAddr = peerInfo.Addr.String()
    }
    t0 := time.Now()
    err := s.globalPushContext().InitContext(s.Env)
    ...
    // 創建一個XdsConnection
    con := newXdsConnection(peerAddr, stream)
    var receiveError error
    reqChannel := make(chan *xdsapi.DiscoveryRequest, 1)
    // 接收con對應的client的請求
    go receiveThread(con, reqChannel, &receiveError)

    node := &core.Node{}
    for {
        // Block until either a request is received or a push is triggered.
        select {
        case discReq, ok := <-reqChannel:
            if !ok {
                // Remote side closed connection.
                return receiveError
            }
            // This should be only set for the first request. Guard with ID check regardless.
            if discReq.Node != nil && discReq.Node.Id != "" {
                node = discReq.Node
                err = s.initConnectionNode(discReq.Node, con)
                if err != nil {
                    return err
                }
            }
            switch discReq.TypeUrl {
            case ClusterType:
                ...
            case ListenerType:
                ...
            case RouteType:
                ...
            case EndpointType:
                ...
            default:
                adsLog.Warnf("ADS: Unknown watched resources %s", discReq.String())
            }

            con.mu.Lock()
            if !con.added {
                con.added = true
                con.mu.Unlock()
                // 添加到xdsclient中
                s.addCon(con.ConID, con)
                defer s.removeCon(con.ConID, con)
            } else {
                con.mu.Unlock()
            }
        case pushEv := <-con.pushChannel:
            err := s.pushConnection(con, pushEv)
            pushEv.done()
            if err != nil {
                return nil
            }
        }
    }
}

可以看到select中有兩個case.
1. discReq, ok := <-reqChannel:是從client來的, receiveThread方法會看到.
2. pushEv := <-con.pushChannel: 是從k8s和galley中來的, 具體可以參考上文 [istio源碼分析][pilot] pilot之DiscoveryServer .

3.1 第一個分支

這里先看一下第一個分支的操作.

receiveThread

func receiveThread(con *XdsConnection, reqChannel chan *xdsapi.DiscoveryRequest, errP *error) {
    defer close(reqChannel) // indicates close of the remote side.
    for {
        // 從client端接收信息
        req, err := con.stream.Recv()
        ...
        select {
        // 將req轉到reqChannel中
        case reqChannel <- req:
        case <-con.stream.Context().Done():
            adsLog.Errorf("ADS: %q %s terminated with stream closed", con.PeerAddr, con.ConID)
            return
        }
    }
}

1. 從client端接收的req直接放入到reqChannel中, 所以會進入到StreamAggregatedResources中的第一個分支.
2. 以ClusterType為例:

             case ClusterType:
                if con.CDSWatch {
                    // Already received a cluster watch request, this is an ACK
                    if discReq.ErrorDetail != nil {
                        adsLog.Warnf("ADS:CDS: ACK ERROR %v %s (%s) %v", peerAddr, con.ConID, con.modelNode.ID, discReq.String())
                        errCode := codes.Code(discReq.ErrorDetail.Code)
                        incrementXDSRejects(cdsReject, node.Id, errCode.String())
                    } else if discReq.ResponseNonce != "" {
                        con.ClusterNonceAcked = discReq.ResponseNonce
                    }
                    adsLog.Debugf("ADS:CDS: ACK %s %s (%s) %s %s", peerAddr, con.ConID, con.modelNode.ID, discReq.VersionInfo, discReq.ResponseNonce)
                    continue
                }
                // CDS REQ is the first request an envoy makes. This shows up
                // immediately after connect. It is followed by EDS REQ as
                // soon as the CDS push is returned.
                adsLog.Infof("ADS:CDS: REQ %v %s %v version:%s", peerAddr, con.ConID, time.Since(t0), discReq.VersionInfo)
                con.CDSWatch = true
                err := s.pushCds(con, s.globalPushContext(), versionInfo())
                if err != nil {
                    return err
                }

1. 可以看到除了是第一次會調用pushCds方法, 后面都是打印ACK/NACK信息. 通過一個變量con.CDSWatch進行控制.
2. 另外通過s.addCon(con.ConID, con)將此連接加入到adsClients, 這個在startPush方法需要分發給所有的client端的時候用到的. 具體可以參考上文 [istio源碼分析][pilot] pilot之DiscoveryServer .

pushCds

// pilot/pkg/proxy/envoy/v2/cds.go
func (s *DiscoveryServer) pushCds(con *XdsConnection, push *model.PushContext, version string) error {
    pushStart := time.Now()
    // 發送給該envoy (con.modelNode)
    // 內容在push中
    // 根據client信息和內容生成要發送的clusters集合
    rawClusters := s.generateRawClusters(con.modelNode, push)
    ...
    // 構造response并發送給該client(envoy)
    response := con.clusters(rawClusters)
    err := con.send(response)
    ...
    return nil
}
func (s *DiscoveryServer) generateRawClusters(node *model.Proxy, push *model.PushContext) []*xdsapi.Cluster {
    rawClusters := s.ConfigGenerator.BuildClusters(s.Env, node, push)
    ...
    return rawClusters
}

1. client端(envoy)信息是con.modelNode, 內容為push, 根據此兩個信息傳入到generateRawClusters中生成cluster集合. 實際上是通過s.ConfigGenerator.BuildClusters方法,

type ConfigGenerator interface {
    BuildListeners(env *model.Environment, node *model.Proxy, push *model.PushContext) []*v2.Listener
    BuildClusters(env *model.Environment, node *model.Proxy, push *model.PushContext) []*v2.Cluster
    BuildHTTPRoutes(env *model.Environment, node *model.Proxy, push *model.PushContext, routeNames []string) []*v2.RouteConfiguration
}

這個部分的內容就是根據當前的內容生成envoy所接受的cluster, endpoint和route.

2. 向client端(envoy)發送數據.

3.2 第二個分支

這里分析pushEv := <-con.pushChannel:, 這個分支是從configController 和 ServiceController 過來的, 具體可以參考上文 [istio源碼分析][pilot] pilot之DiscoveryServer .

func (s *DiscoveryServer) pushConnection(con *XdsConnection, pushEv *XdsEvent) error {
    ...
    if con.CDSWatch {
        err := s.pushCds(con, pushEv.push, currentVersion)
        ...
    }
    if len(con.Clusters) > 0 {
        err := s.pushEds(pushEv.push, con, currentVersion, nil)
        ...
    }
    if con.LDSWatch {
        err := s.pushLds(con, pushEv.push, currentVersion)
        ...
    }
    if len(con.Routes) > 0 {
        err := s.pushRoute(con, pushEv.push, currentVersion)
        ...
    }
    ...
    return nil
}

很多細節部分省略了很多, 可以看到最終是往此client端發送cluster, endpoint, route 和 listener.

4. 總結

ads.png

5. 參考

1. istio 1.3.6源碼